Finisher Fs-509/516 (+ Punch Kit Pk-505) - Konica Minolta bizhub pro 920 Copier Manual

Preparation for Use

Finisher FS-509/516 (+ Punch Kit PK-505)

No. Name
1 Finisher door
2 Primary (main) tray
3 Secondary (sub) tray
Reminder
The Primary (Main) tray gradually goes down while printed materials out-
put. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
bizhub PRO 920
3
2
Description
Opens to the internal finisher to allow replenishing
staples and clearing mishandled paper, and also to
allow removal of waste paper punched out when
Punch kit PK-505 is installed.
Holds sets output in the selected finishing mode
other than specified above.
Holds sets output in Sort, Group, Face Up, or Face
Down mode.
1
Finisher FS-509/516
2-11
2