Konica Minolta bizhub PRESS 1250 User Manual page 229

6.6 Paper Presetting
7
Press [Punch].
The Punch Screen will be displayed.
% Select either [Pre-Punched] or [No Hole-Punch] from under [Punch].
8
Press [Both Sides Adj.].
The Both Sides Adjust Screen will be displayed.
% Press [Front] or [Back] to select the print side to be adjusted. Press [Vertical], [Horizontal],
[Up/Down], or [Right/Left] to select the adjustment item. Use the keypad, [,], or [+] on the screen
to enter the desired adjustment value. Press [+<->-] to specify the adjustment value to be positive
or negative.
% For details on the adjustment procedure, see Section 4 of the POD Administrator's Reference.
bizhub PRESS 1250/1052
6
6-51