Detailed Setting In Stamp - Konica Minolta bizhub PRESS 1250 User Manual

7.17 Printing Additional Information: Stamp
6
Press [OK] twice to complete the setting.
The setting will be confirmed and the Application Screen will be restored.
% To restore the previous setting, press [Cancel].
% To disable the function while keeping the current setting, press [Function OFF].
7
Press [OK] on the Application Screen to return to the Copy Screen.
The Copy Screen will be restored with the Stamp/Overlay icon displayed under [Application].
8
Select additional copy conditions, as desired.
9
Enter the desired print quantity from the control panel keypad.
10
Press Start on the control panel.
7.17.8

Detailed Setting in Stamp

Making fine adjustment on printing position
Use this function to make fine adjustment on printing position of Preset Stamp, Set Numbering, Page No.,
Date/Time, Watermark, and Annotation. The Fine Adjustment Screen will be displayed when [Fine Adjust-
ment] is pressed on each screen.
The adjustment range is 0 to 1.96 inches (0 to 50 mm), in lengthwise direction ([Top] or [Bottom]) and in width-
wise direction ([Right] or [Left]).
1
Select a direction key, then press the keypad, [,], or [+] to enter adjustment data.
2
Press [OK] to complete the setting and return to the previous screen.
bizhub PRESS 1250/1052
7
7-73