Konica Minolta bizhub PRESS 1250 User Manual page 375

8.8 Using Perfect Binder PB-503
2
Position the original.
% For the original available in perfect binding, see page 8-43.
3
Load paper for body sets in a tray.
% Load paper for body sets in a main body tray (tray 1, tray 2) or Paper Feeder Unit PF-703/PF-706
(trays 3 to 8).
4
Load paper for covers in a tray.
% Load paper for covers in one of the following trays.
When printing on covers: main body trays (tray 1, tray 2), Paper Feeder Unit PF-703/PF-706 (trays 3
to 8)
When not printing on covers: Perfect Binder PB-503 cover tray, upper/lower tray of the post inserter
of Folding Unit FD-503, Large Capacity Post Inserter PI-PFU in addition to the trays above
NOTICE
Use custom paper size for cover. Entering length/width is required. Be sure to check precise dimen-
sions of cover sheets to be used.
If cover trimming is desired, be sure to use the paper size that secures 5 mm to 40 mm of trimming
width.
5
Press [COPY] tab to display the Copy Screen.
6
Select the tray loaded with paper for the body sets.
The paper size will be detected automatically.
7
Change the paper setting, as required.
% The paper size will be detected automatically.
bizhub PRESS 1250/1052
8
8-50