Using Multi Puncher Gp-501; Punching File Holes In Copies: Punch - Konica Minolta bizhub PRESS 1250 User Manual

8.11

Using Multi Puncher GP-501

8.11 Using Multi Puncher GP-501
Using Multi Puncher GP-501, the following types of punch holes can be made in printed sheets.
Die set model
DS-501
DS-502
DS-503
DS-504
DS-505
DS-506
DS-507
8.11.1

Punching File Holes in Copies: Punch

Set the Punch mode to punch file holes in printed sheets. Follow the procedure below to select the paper
size (8.5 e 11 v) and punch position. To select the punch hole type, change the die set to the desired one.
d
Reference
For detailed specifications of Multi Puncher GP-501, see Section 13.
0 Available paper size is 8.5 e 11 v only. 8.5 e 11 w cannot be used for this function.
0
A power switch is provided on the multi puncher. Be sure to turn it on before turning on the main power
switch and sub power switches of the main body.
0
The die set model currently mounted on the multi puncher cannot be checked from the control panel.
If required, open the front door of the multi puncher to check it before the operation.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
4
Press [Punch].
bizhub PRESS 1250/1052
Hole type
8
8-68