Table 11: Link And Activity Status Leds For The 1 Gbps And 10 Gbps Ports - Allied Telesis x530L Series Installation Manual

The LEDs display link status and activity. The possible LED states are
described in Table 11.
Table 11. Link and Activity Status LEDs for the 1 Gbps and 10 Gbps Ports
State
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
x530L Series Installation Guide for Stand-alone Switches
Description
The transceiver has established a 10 Gbps
link to a network device.
The transceiver is transmitting or receiving
data in 10 Gbps.
The transceiver has established a 1 Gbps
link to a network device.
The transceiver is transmitting or receiving
data in 1 Gbps.
Possible causes of this state are:
- The port is empty.
- The transceiver has not established a link
to a network device.
- A non-supported module is installed.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
37