Leds For The 1Gbps Sfp And 10Gbps Sfp+ Transceiver Slots; Figure 6: Link And Activity Leds For The 1Gbps Sfp And 10Gbps Slot+ Slots On The At-X550-18Xsq Switch; Table 4: Link And Activity Status Leds On The 1Gbps And 10Gbps Ports On The At-X550-18Xtq Switch - Allied Telesis AT-x550-18XTQ Installation Manual

LEDs for the
1Gbps SFP and
10Gbps SFP+
Transceiver Slots
Table 3. Link and Activity LEDs on the 1Gbps/10Gbps Ports on the AT-
x550-18XTQ Switch (Continued)
State
Off
The 1Gbps SFP and 10Gbps SFP+ transceiver slots on the AT-x550-
18XSQ Switch have one LED. The LEDs are located between the slots.
Refer to Figure 6.
Top Transceiver Slot LED
Figure 6. Link and Activity LEDs for the 1Gbps SFP and 10Gbps Slot+
Slots on the AT-x550-18XSQ Switch
The LED displays link status and activity. The possible LED states are
described in Table 4.
Table 4. Link and Activity Status LEDs on the 1Gbps and 10Gbps Ports on
State
Solid Green
Flashing Green
x550 Series Installation Guide for Virtual Chassis Stacking
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
the AT-x550-18XTQ Switch
The transceiver has established a 10Gbps
link to a network device.
The transceiver is transmitting or receiving
data in 10Gbps.
Description
Bottom Transceiver Slot LED
Description
29