Table 11: Link And Activity Status Leds For The 1Gbps And 10Gbps Ports - Allied Telesis AlliedWare Plus x530DP Series Installation Manual

Stackable gigabit layer 3 ethernet switches
Hide thumbs Also See for AlliedWare Plus x530DP Series:
Table of Contents

Advertisement

Chapter 1: Overview
42
The LEDs display link status and activity. The possible LED states are
described in Table 11.
Table 11. Link and Activity Status LEDs for the 1Gbps and 10Gbps Ports
State
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
Description
The transceiver has established a 10Gbps
link to a network device.
The transceiver is transmitting or receiving
data in 10Gbps.
The transceiver has established a 1Gbps
link to a network device.
The transceiver is transmitting or receiving
data in 1Gbps.
Possible causes of this state are:
- The port is empty.
- The transceiver has not established a link
to a network device.
- A non-supported module is installed.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.

Advertisement

Table of Contents
loading

Table of Contents