Table of Contents
Advertisement
Pressure Measurement
Comparator Function (/DA Option)
Setting the Beep Sound
Keylock Function
36
Determines whether the measured pressure data is greater than or less
than two reference values (Hi and Lo) and displays the results on the front
panel LED. Also, the determined results are output as a TTL from the output
connector on the rear panel. Determinations are made once per conversion
period of the D/A output (2 ms).
Criterion
X>Hi
Determination
HI
X: Measured value Hi: Upper limit setting Lo: Lower limit setting
1.
Press MENU.
2.
Use the
and
3.
Use the
and
ENTER/LOCAL.
: Enable
: Disable
If you turn the comparator function , also set the upper and lower limits.
4.
Use the
,
and
ENTER/LOCAL.
5.
Use the
,
and
ENTER/LOCAL.
6.
To return to the normal measurement screen, press MENU.
Note
Set the reference value so that Hi > Lo.
You can turn the beep and key clic sounds ON and OFF.
1.
Press MENU.
2.
Use the
and
3.
Use the
and
: Activates the beep and key click sounds.
: Deactivate the beep and key click sounds.
4.
To return to the normal measurement screen, press MENU.
Locks ZERO CAL or all keys excluding MENU and LIGHT.
1.
Press MENU.
2.
Use the
and
3.
Use the
and
: Releases the lock
: Locks only ZERO CAL
: Locks all keys excluding MENU and LIGHT
4.
Press ENTER/LOCAL to confirm.
HiXLo
IN
to select
, then press ENTER/LOCAL.
to set the comparator output function (
to set the lower limit pressure value (
to set the upper limit pressure value (
to select , then press ENTER/LOCAL.
to set the beep and key click sounds (
to set
, and press ENTER/LOCAL.
to set the key lock type (
Lo>X
LO
) and press
), then press
), then press
).
).
IM 767361-01E
Advertisement
Table of Contents
