Figure 26: Attaching The Brackets To The At-Gs924Mx Switch For Wall Installation - Allied Telesis AT-GS924MX Installation Manual

Chapter 4: Installing the Switch on a Wall
72
Positions of the brackets if the switch is to be
installed on the wall with the front panel on the left.
Position of the brackets if the switch is to be
installed on the wall with the front panel on the right.
Figure 26. Attaching the Brackets to the AT-GS924MX Switch for Wall
4. If you are installing the switch on a wall with wooden studs, use a stud
finder to locate and mark with a pencil or pen the middle of a stud in
the wall where you plan to install the switch. Be sure that the selected
location adheres to the recommendations in "Recommended Minimum
Wall Area Dimensions" on page 69.
Installation