10. Install the rocker switch into plug (A) and install the
rotary switch into plug (B). These plugs come prewired
into the windrower console.
11. Reinstall the cover (A) with five screws (B).
NOTE:
Refer to
2.8.1 Activating the Double Windrow
Attachment (DWA), page 45
display module for control of DWA functions.
2.8.1 Activating the Double Windrow Attachment (DWA)
CAUTION
Check to be sure all bystanders have cleared the area.
NOTE:
All cab display module images used in this procedure come from an M155 Self-Propelled-Windrower. Other
windrower models are similar.
214049
ASSEMBLY/SETUP INSTRUCTIONS
to program the cab
45
Figure 2.77: DWA Switch
Figure 2.78: Console Control Plate
Revision A