Display Key Group - Keysight Technologies B2961A User Manual

Remote
Color
Zoom
Pref.

Display key group

Pressing the Display key displays the following softkeys for setting the display
functions. The present setting is indicated by an asterisk on the softkey label.
Displays the following softkeys for enabling or disabling the front panel display
when the B2961A/B2962A is in the remote mode.
OFF Disables the front panel display. Effective for fast operation.
ON Enables the front panel display.
Displays the following softkeys for specifying the display color set.
Set 1 Sets the color set 1.
Set 2 Sets the color set 2.
Displays the following softkeys for enabling or disabling the display zoom.
OFF Disables the zoom. Normal display.
ON Enables the zoom. Only the measured data is displayed.
Zoom-in can be cancelled by pressing the Zoom Out assist key.
In the zoom-in state, setup information is not displayed, and the measurement result
is zoomed. Then,
• the Dual view displays the primary measurement data with a large font, and the
secondary measurement data for each channel with a small font.
• the Single view displays the primary and secondary measurement data with a
large font.
Displays the Display Preference dialog box. See
page 4-48.
Keysight B2961A/B2962A User's Guide, Edition 3
Front Panel Reference
Display key group
"Display Preference dialog box" on
4-47