Result Key Group; Measure Result Dialog Box - Keysight Technologies B2961A User Manual

Measure
Trace
Front Panel Reference

Result key group

Result key group
Pressing the Result key displays the following softkeys for displaying the
measurement and trace results.
Displays the measurement result. See
Displays the trace result. See

Measure Result dialog box

This dialog box is used to display the last single (one shot) measurement result
(maximum 100000 data) stored in the data buffer.
This dialog box provides the following GUI for displaying the measurement result.
The result data is shown in the index and data table below the Type field. Also, the
data is plotted in the graph area above the Points fields.
Ch Only on 2-channel models. Channel 1 (Ch 1) or 2 (Ch 2)
This field specifies the channel of the data to display.
Type Type of data to display, AMPS, VOLTS, OHMS, WATTS,
MATH, or TIME
AMPS: Current measurement data
VOLTS: Voltage measurement data
OHMS: Resistance data given by Resistance=Vmeas/Imeas
WATTS: Power data given by Power=VmeasImeas
MATH: Calculation result data of math expression
TIME: Time data
In the above formula, Vmeas is the voltage measurement data,
and Imeas is the current measurement data.
For details on using resistance compensation, see
Compensation" on page
Points Number of data points.
Max. Y-axis maximum value of the graph.
Min. Y-axis minimum value of the graph.
4-38
"Measure Result dialog box" on page
"Trace Statistical Result dialog box" on page
6-18.
Keysight B2961A/B2962A User's Guide, Edition 3
4-38.
4-39.
"Resistance