Keysight Technologies B2961A User Manual page 40

Task
To enable/disable Media Transfer Protocol
for easy file access
To see status of USB interface
To set GPIB address
To see status of GPIB interface
To set configuration of Digital I/O
To read/write a value set to Digital I/O
Table 1-9
Task
To set power line frequency
To return to the factory shipment
condition
To apply initial settings
To perform self-calibration
To perform self-test
To check errors
To clear error log
To clear time stamp
To set automatic clear of time stamp
To set start-up operation
To enable/disable beep and sound
To enable/disable the function to restore
the trigger mode settings on the local state
To set date and time
To perform firmware update
To perform demonstration
Getting Started
Operation Summary
System Setup and Operations
System > PLC function keys
System > More > Factory function keys
System > Reset function keys
System > Cal/Test > Self-Cal function keys
System > Cal/Test > Self-Test function keys
System > Error > Log function keys
System > Error > Clear function keys
System > Timestamp > Clear function keys
System > Timestamp > Auto CLR function keys
System > More > Start-up function keys
System > More > Sound function keys
Display > Pref. function keys
System > More > Info. > Date/Time function keys
System > More > Info. > Update > Firmware function keys
System > More > Info. > Demo. function keys
1-16
Relevant front panel key
I/O > USB function keys
I/O > USB function keys
I/O > GPIB function keys
I/O > GPIB function keys
I/O > DIO > Config function keys
I/O > DIO > R/W function keys
Relevant front panel key
Keysight B2961A/B2962A User's Guide, Edition 3