Related Manuals for Keysight Technologies N5191A
Summary of Contents for Keysight Technologies N5191A
- Page 1 Keysight Technologies N5191A/93A Agile Signal Generators For the latest revision of this installation note, go to the following website: http://www.keysight.com/find/uxg Firmware Upgrade Guide...
- Page 2 The information contained in this document is subject to change without notice. Keysight Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
-
Page 3: Firmware Upgrade Guide
To Be Performed By: ..... . (X) Keysight Technologies Service Center (X) Personnel Qualified by Keysight Technologies (X) Customer Estimated Installation Time: .... - Page 4 The instructions in this firmware upgrade guide enable you to upgrade firmware on a Keysight X-Series signal generator from the Keysight Technologies website. Before using this guide, you should be familiar with the basic operation of the signal generator. If you are not comfortable with using the signal generator’s menus and with entering parameter...
- Page 5 Firmware Upgrade Guide Step 1. Confirm Required Equipment PC Requirements 450 MHz Pentium II or higher Operating System, Windows XP, Windows 7, Windows 10 128 MB RAM 20 MB free disk space Internet browser to download firmware files from the Internet, or to view firmware release information on your PC over the Internet. Either browser must be Java enabled with Java 1.02 or above.
- Page 6 — If the ERR annunciator is on: a. View the error queue: Press Error. b. Resolve all problems causing errors. If you are unable to resolve the errors, contact Keysight Technologies (see page 11). c. Clear the error queue: Press Clear Error Queue(s) and go to step 3.
- Page 7 There are numerous ways to configure the signal generator to connect to the LAN. Refer to: — Keysight MXG FAQ’s “How do I connect the Keysight MXG Signal Generator to a PC using LAN?”. — Keysight Technologies IO Libraries USB/LAN/GPIB Interfaces Connectivity Guide (E2094– 90009). — Keysight X-Series Programming Guide or, —...
- Page 8 Firmware Upgrade Guide Step 4. Download and Install the Firmware Files From the Keysight Technologies website 1. In an Internet browser, enter http://www.keysight.com/find/upgradeassistant. 2. Download and run the latest Keysight X-Series Firmware Package. 3. Once the upgrade assistant starts, follow the program’s prompts (see page 4.
- Page 9 Firmware Upgrade Guide Running the Upgrade Assistant Firmware Upgrade Guide N5191-90023...
- Page 10 Firmware Upgrade Guide Firmware Upgrade Guide N5191-90023...
- Page 11 Returning a Signal Generator to Keysight Use the following steps to return a signal generator to Keysight Technologies for servicing: 1. Gather as much information as possible regarding the signal generator’s problem. 2. Call the phone number listed on the Internet (http://www.keysight.com/find/assist) that is specific to your geographic location.
- Page 12 This information is subject to change without notice. © Keysight Technologies 2018 Edition 1, July 2018 N5191-90023 www.keysight.com...