Table of Contents
Advertisement
9.3. VIEWING THE RECORDING LIST
The
Recording List submenu displays a list of recordings stored in the instrument memory.
Amount of memory dedicated to
recordings.
Recording name.
Recording start time.
If the stop date is in red, it does not match the configured date, due to a power supply problem (battery low or disconnection of the
instrument supplied by external power only).
9.4. DELETING RECORDINGS
When the list of records is displayed (see Figure 9-2), select the recording to be erased by highlighting it using the and buttons.
(The selected recording is bolded.) Then press the
9.5. VIEWING RECORDS
9.5.1. RECORDING PARAMETERS
With the Recording List displayed, select a recording and press to open it. The Recording Parameters menu is displayed.
Measurement types.
If a measurement does not appear among the tabs at the bottom of the screen, calculation of the measurement was incompatible
with the selected configuration (connection, types of sensors, ratios). For example, if the configured calculation mode is Non-active
Quantities not broken down (see §4.5.1), the D tab does not appear.
Press the associated function button to display the graph for a measurement.
Figure 9-2
button. Press to validate or
Figure 9-3
67
Recording stop time.
to cancel.
The
icon navigates through multiple
screen pages. You can also navigate
pages by pressing the or button.
Advertisement
Table of Contents
