Table of Contents
Advertisement
3.3.1. SINGLE-PHASE NETWORK
Figure 3-3
(2-wire single-phase connection)
3.3.2. SPLIT-PHASE NETWORK
Figure 3-5
(2-wire split-phase connection)
3.3.3. THREE-PHASE NETWORK
Figure 3-8
(3-wire three-phase connection)
When connecting to a three-phase network, you do not need to connect all terminals in voltage or current.
For 3-wire three-phase, indicate the current sensors that will be connected: all 3 sensors (3A) or only 2 (A1 and A2, or A2 and A3, or A3
and A1).
For 4- and 5-wire three-phase, indicate the voltages that will be connected: all 3 voltages (3V) or only 2 (V1 and V2, or V2 and V3, or
V3 and V1).
Figure 3-6
(3-wire split-phase connection)
Figure 3-9
(4-wire three-phase
connection)
21
Figure 3-4
(3-wire single-phase connection)
Figure 3-7
(4-wire split-phase connection)
Figure 3-10
(5-wire three-phase connection)
Advertisement
Table of Contents
