The
Waveform capture mode displays and captures transients and inrush currents. It contains two sub-modes:
■
Transient mode (§5.1)
■
Inrush current mode (§5.2)
To select a sub-mode, move the yellow cursor to it using the and buttons, then validate with the button.
To return to the Waveform capture screen, press
5.1. TRANSIENT MODE
The
Transient mode is used to record transients, to look up the list of recorded searches and the list of transients they contain, or
erase them. You can record up to 7 detections and 210 transients.
When the Transient mode is invoked:
■
If no recording has been made, the Detection Schedule screen is displayed (Figure 5-2).
■
If transients have been recorded, the Detection List is displayed (Figure 5-3).
Sub-mode indicator.
Memory indicator. The black bar
represents memory used; the white
bar represents memory available.
Shortcut to the Configuration menu
to set the voltage and current
triggering thresholds (see §4.8).
5.
WAVEFORM CAPTURE
Figure 5-1
.
Figure 5-2
40
Display list of transient searches
(see §5.1.2).
Configure a search (see §5.1.1).
Start a search.