Table of Contents
Advertisement
16.4. MEMORY CARD
The instrument accepts SD (SDSC), SDHC, and SDXC type memory cards. The card supplied with the instrument can store up to
8GB. (Note, however, that the maximum size of a trend recording is 2GB.)
Before removing or inserting the memory card, ensure the instrument is disconnected and powered OFF. Write-protect the memory
card when you remove it from the instrument. Unlock write-protection before inserting the card back into the instrument.
Memory card not protected
To access the memory card, proceed as for the replacement of the battery.
1.
Make sure that the instrument is disconnected and OFF.
2.
Remove the cover and remove the battery from its compartment without disconnecting it.
3.
Press on the memory card to release it, then press on the protecting tab to remove it from its slot. You can then grip the card.
4.
When you replace the memory card, the contacts must be on the left side and the locator down.
5.
Insert the card into its slot until it snaps into place. The protecting tab is at the top of the card.
6.
Put the battery back in its compartment and screw the cover back on.
Memory card protected
Figure 16-4
Figure 16-5
99
Advertisement
Table of Contents
