Table of Contents
Advertisement
Starting date of the selection.
Energy calculation mode.
Pressing this button lets you
define the start of the selection.
The display period of this bar chart is one minute. Since the recording period is one second, each bar of this bar chart represents a
value recorded in a one-second window once a minute.
The energy calculation mode determines the sum of the powers on the selected bars.
With the MIN-AVG-MAX mode activated, the display differs slightly from the previous one because there is no loss of information.
Date at cursor position.
This screen is a partial view of
the trend graph. There are other
screens before and after the
Use the or button to move
The period of display of this graph is two hours. Since the recording period is one second, each point of this graph represents a
value recorded every second taken every two hours. There is therefore a substantial loss of information (7,199 out of 7,200), but the
display is rapid.
MIN-AVG-MAX mode activated.
visible part.
the cursor.
Figure 9-14
Figure 9-15
Figure 9-16
Figure 9-17
71
Date of the cursor (ending date of the
selection). Use the or buttons to
move the cursor.
Position of the viewing window in the
record.
To select the display filter, press the
or button.
Advertisement
Table of Contents
