Table of Contents
Advertisement
The sum of the powers of the
three phases (Σ) is presented in
bar graph form.
For the energy graphs, the quantities are expressed in Wh, J, toe, or BTU, depending on the configured unit (see §4.5.2).
This graph differs slightly from the previous one because, with the MIN-AVG-MAX mode, there is no loss of information.
The MIN-AVG-MAX mode can be activated for the powers to display, above the graph, the mean power value at the cursor date
along with the maximum and minimum power values in the display period. Note that, in contrast with the other quantities, only the bar
chart of mean values is represented.
Figure 9-10
Figure 9-11
Figure 9-12
Figure 9-13
70
Changes the display scale between
1 minute and 5 days.
Advertisement
Table of Contents
