Table of Contents
Advertisement
2.
Remove the cover.
3.
Tilt the top of the battery outward and remove it from its compartment.
4.
Disconnect the battery connector without pulling on the wires.
The instrument retains the date-time function for approximately 24 hours without the battery.
Spent batteries must not be treated as ordinary household waste. Take them to the appropriate recycling collection
Installing the new battery.
1. Connect the new battery. The connector is error-proofed to prevent reversals of polarity.
2. Place the bottom of the battery in its compartment, then the top. Arrange the wires so that they do not protrude.
3. Put the battery compartment cover back in place and screw the 6 screws back in.
If the battery is disconnected, it must then be fully recharged, even if it is not replaced, so that the instrument can detect the
battery charge condition (this information is lost when the battery is disconnected).
Figure 16-2
Figure 16-3
98
point.
Advertisement
Table of Contents
