Table of Contents
Advertisement
5.2.3.2. 3A RMS display screen for a three-phase connection without neutral
5.2.3.3. L1 RMS display screen for a three-phase connection with neutral
MAX: maximum half-cycle RMS
value of the inrush current capture.
t: relative time position of the cursor
(t=0 corresponds to the start of the
inrush current capture).
NOTE: Filters L2 and L3 display the recording of the true half-cycle RMS current and voltage of phases 2 and 3. The
screen is identical to the one displayed for filter L1.
The
,
,
and
value.
5.2.3.4. RMS display screen in Hz for a three-phase connection without neutral
The
and
buttons go to the first occurrence of a minimum or maximum frequency value.
Figure 5-9
buttons move the cursor to the first occurrence of a minimum or maximum voltage or current
Figure 5-11
Figure 5-10
45
Time cursor of the graph. Use the
or button to move the cursor.
V1: RMS value of voltage 1 in the
half-cycle at the position of the cursor.
A1: RMS value of current 1 in the half-
cycle at the position of the cursor.
Advertisement
Table of Contents
