Table of Contents
Advertisement
6.3.2. L1 APPARENT POWER HARMONICS DISPLAY SCREEN
Information about the harmonic at
the cursor position.
S-h03: harmonic number.
%: level of harmonics with the
fundamental apparent power as
reference (%f) or the (total)
apparent power as reference (%r).
+045°: phase shift of the voltage
harmonic with respect to the
current harmonic for the order in
min–max: maximum and
minimum levels of the harmonic
in question. They are reset when
the harmonic number is changed
or the button is pressed.
NOTE: Filters L2 and L3 display the apparent power of the harmonics for phases 2 and 3, respectively. The screen is
identical to the one displayed for filter L1.
6.4. PHASE-TO-PHASE VOLTAGE
The U sub-menu is available for all connections except 2- or 3-wire single-phase. This sub-menu displays the harmonics of the phase-
to-phase voltage.
6.4.1. 3L PHASE-TO-PHASE VOLTAGE HARMONICS DISPLAY SCREEN
Information about the harmonic
at the cursor position.
U-h03: harmonic number.
%: level of harmonics with the
fundamental RMS value as
reference (%f) or the (total) RMS
value as reference (%r).
V: RMS voltage of the harmonic
in question.
+000°: phase shift with respect to
the fundamental (order 1).
Harmonic selection cursor. Use the
or button to move the cursor
question.
Harmonic selection cursor. Use the
or button to move the cursor
Figure 6-7
Figure 6-8
51
Display of the 3 phases 3L, of L1, L2 or
L3. To select the display press the or
button
Horizontal axis indicates the orders of
the harmonics. The level of the
harmonic is given as a percentage of
the fundamental apparent power or the
(total) apparent power.
Rang DC: DC
component.
1 to 25: harmonics of order 1 to 25.
When the cursor exceeds order 25,
order 26 to 50 appears.
: Indicator of energy consumed for
this harmonic
Display of the 3 phases 3L, of L1, L2
or L3. To select the display press the
or button.
Horizontal axis indicates the orders of
the harmonics. The level of the
harmonic is given as a percentage
with respect to the fundamental or to
the total RMS value.
Rang DC: DC component.
1 to 25: harmonics of order 1 to 25.
When the cursor exceeds order 25,
order 26 to 50 appears
Advertisement
Table of Contents
