2.5.4. OTHER BUTTONS
Button Function
Configuration.
Snapshot of current screen and retrieval of screens already stored.
Help: provides information about the currently displayed functions and symbols.
2.6. CONNECTORS
2.6.1. CONNECTION TERMINALS
These are located on one side of the housing. Each terminal is protected by a plug. The plugs must be removed to connect the leads,
then stowed in the pouch in the cover of the instrument.
To keep the instrument water- and air-tight and the terminals clean, put the plugs back on the unused terminals. The terminals let the
operator:
■
screw special leads in place to ensure total water-tightness
■
or connect standard leads that are slightly less water-tight
Figure 2-3
16
§ 12
Four current input terminals for
current sensors (MN clamp, C
clamp, MiniFlex
, AmpFlex
®
clamp, SL261 clamp, etc.)
Five voltage input terminals
See
§ 4
§ 11
, PAC
®