Viewing The Inrush Recording - AEMC 8230 User Manual

5.7.2

Viewing the Inrush Recording

1. From the main Inrush mode display, select Open last Inrush and press Enter.
This will display the Open Inrush screen.
2. Press Enter one more time and the waveform of the recording is displayed.
If the stopping threshold is not detected, the message "Stopping threshold not
detected" will be displayed.
NOTE: Use the Zoom tools
waveform.
52
at any time to zoom in or out of part of the
Power Quality Analyzer Model 8230