Siemens SINUMERIK 840C Installation Instructions Manual page 180

5 Machine Data Dialog (MDD – as from SW 3)
5.10.1 Description
The paths and file names and simple examples of file contents (configuring data)
are explained in the points below. Other configuration possibilities are given in
the lists in the control.
List module paths ASCII lists:
S
and files
(e.g. TEA1 MD)
S
S
S
List contents: Data lists The data lists contain the data to be displayed in each display. The file names
are such that the contents of the lists can be recognized from the name.
Examples: nc
an
The file contents of 42.103, for example, are structured as follows:
TEA1 a 1 (bits 3, normal "N9 T36 V10 U10",
headline "B40 S11 p2 L0", path 42)
H421
2400
The header can be interpreted as follows:
TEA1
a
1
"N9 T36 V10 U10"
path 42
5–52
Data lists (e.g.)
SIEMENS list module/TEA1/LB data lists/nc11
User list module/TEA1/LB data lists/nc11
Text lists (e.g.)
SIEMENS list module/TEA1/ENGLISH/tea1txt
User list module/TEA1/ENGLISH/tea1txt
Semantic lists (e.g.)
SIEMENS list module/TEA1/LB-Semantics lists/tea1sem
User list module/TEA1/LB-Semantics lists/tea1sem
Helptexts/infolists
SIEMENS list module/TEA3/ENGLISH/tea3help
User list module/TEA3/ENGLISH/tea3help
1 1. 103
1st softkey: Basic data (3rd level)
1st softkey: General NC MD
NC MD (1st level)
5 6. 103
6th softkey: Status data (3rd level)
5th softkey: MSD (2nd level)
Drive data (1st level)
Contains the intermediate heading (of file
tea1head.106 )
Contains machine data (e.g. MD 240* becomes
MD 2400)
NC MD
axis-specific
(n = normal, k = channel, s = spindle)
to file function "Edit"
linked, 0 = always on-line
Column width for
Data number:
Text:
Word:
Unit:
Softkey path of display (stored in
file tea1...). It is evaluated when
"search" and "global" are selected.
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
(2nd level)
9
36
10
10
09.95
SINUMERIK 840C (IA)