Siemens SINUMERIK 840C Installation Instructions Manual page 519

7 Drive Machine Data (SIMODRIVE Drive MD)
7.3.2 Drive MD (data description)
1205
Default value
1.0
Input of damping for current setpoint filter 2 (PT2 low-pass). The filter is activated via machine
data MD 1200 (No. current setpoint filters) and MD 1201 (Type current setpoint filter).
1206
Natural frequency current setpoint filter 3
Default value
0.0
Input of natural frequency for current setpoint filter 3 (PT2 low-pass). An entry of < 10 Hz as
the natural frequency of the low-pass filter initializes the filter as a proportional element with a
gain of 1 independently of the associated damping. The filter is activated via machine data MD
1200 (No. current setpoint filters) and MD 1201 (Type current setpoint filter).
1207
Default value
1.0
Input of damping for current setpoint filter 3 (PT2 low-pass). The filter is activated via machine
data MD 1200 (No. current setpoint filters) and MD 1201 (Type current setpoint filter).
1208
Natural frequency current setpoint filter 4
Default value
0.0
Input of natural frequency for current setpoint filter 4 (PT2 low-pass). An entry of < 10 Hz as
the natural frequency of the low-pass filter initializes the filter as a proportional element with a
gain of 1 independently of the associated damping. The filter is activated via machine data MD
1200 (No. current setpoint filters) and MD 1201 (Type current setpoint filter).
7–104
Damping current setpoint filter 2
Lower input limit Upper input limit
0.05
Lower input limit Upper input limit
0.0
Damping current setpoint filter 3
Lower input limit Upper input limit
0.05
Lower input limit Upper input limit
0.0
©
Siemens AG 1992 All Rights Reserved
Units
5.0
Units
8 000.0
Units
5.0
Units
8 000.0
6FC5197- AA50
SINUMERIK 840C (IA)
09.95
Active
at once
–
Active
at once
Hz
Active
at once
–
Active
at once
Hz