Servo Trace Display - Siemens SINUMERIK 840C Installation Instructions Manual

9 Drive Servo Start-Up Application (as from SW 3)

9.6.2 SERVO trace display

9.6.2 SERVO trace display
You can call the graphic representation of the SERVO trace function by selecting
Display
this softkey.
Fig. 9.37
Explanation Two SERVO trace signals are output in this display. The trigger is shown as a
vertical, broken line.
Note The displayed measurement results can be transferred to the MMC for storage
as a file by means of softkey File functions.
9–68
Follow.g error
Part. setpt
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
SINUMERIK 840C (IA)