Siemens SINUMERIK 840C Installation Instructions Manual page 630

09.95
Note With SW 4 and higher, the Contr.para FDD and Contr.para MSD softkeys have
been combined under the Contr.para drive softkey with one exception: Under
the circularity test function, the softkeys have remained as they were in SW 3.
You can call up the graphic display of measurement results with this softkey.
Display
Fig. 9.3
You can enter the file function area by selecting this softkey.
File
functions
Example for position
control loop
Fig. 9.4
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
9 Drive Servo Start-Up Application (as from SW 3)
9.1.2 Softkeys
9–9