2Nd Level: File Functions - Siemens SINUMERIK 840C Installation Instructions Manual

5 Machine Data Dialog (MDD – as from SW 3)
5.8.4 File functions (sequence of operation – as from SW 3)
Selected file can be copied.
Copy
The on-line file data are saved into the selected file. Here again the BOOT file
Save to
has a special status (see drive installation/start-up).
disk
The lower user data area must be selected.
The selected file is loaded into the NCK. The on-line file and the BOOT file
Load
cannot be loaded.
from disk
Note If the file functions are selected after an NCK Power On, the password has to be
entered again.

5.8.4.2 2nd level: File functions

Selection/ (Example
drive MD)
Drive
MD
Explanation Press the Diagnosis, Start-up, Machine data, Drive MD (e.g.) and File functions
softkeys to call up the 2nd level file functions display.
5–38
Machine
data
Axis
(FDD)
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
Diagnosis
Start-up
Spindle File
(MSD) functions
SINUMERIK 840C (IA)
09.95