Siemens SINUMERIK 840C Installation Instructions Manual page 127

4 MMC Area Diagnosis
4.8.3 PCF files (up to SW 2)
Setting data for PCF files:
You define the active PCF file in the general setting data.
The setting data are described in the Operator's Guide.
Fig. 4.28 SW 1
Example PCF file
Fig. 4.29 ASCII editor with PCF 1 file
1) Not in SW 1
4–64
MACHINE PARAMETER PROGRAMM.
JOG PROGRAM RESET
General data
Work area General Spindle
limitation data
MACHINE PARAMETER PROGRAMM.
Start-up/Edit PLC data
SAVE
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SERVICES
General
Scale
data bits
SERVICES
09.95
DIAGNOSIS
16:38
BAG :1
Kanal :1
Axial Cycle
bits data
DIAGNOSIS
09:22
PCF1
Insert/
overwrite
Cut to
clipboard
Copy to
clipboard
Search
Paste from
clipboard
Undo
>>
SINUMERIK 840C (IA)