Pcf Files (Up To Sw 2) - Siemens SINUMERIK 840C Installation Instructions Manual

4 MMC Area Diagnosis

4.8.3 PCF files (up to SW 2)

4.8.3 PCF files (up to SW 2)
PCF files are files in which the user can store alarm texts and messages. The
files are assigned to the language defined in the configuration file KONFIG.
On POWER ON, PCF files are automatically loaded from the current language
directory (set language) to the NCK if the file name is between PCF1 and
PCF9999.
Example of PCF files In the directory DEUTSCH you will find the file PCF1
Fig. 4.26 PCF files in the directory DEUTSCH in the range DIAGNOSIS
If no PCF files yet exist in the language directory, they must first be created. You
can open and edit files in the following ways:
S
S
S
With software version 2 and higher, message texts can also be configured using
the files MEDEATTR. and MELDETEXT in the DIAGNOSIS PC DATA/MASTER
CONTROL area.
A detailed description is to be found in Section 12 of the Interface Description
Part 1, Signals.
4–60
From SW 3 the files MELDDATR and MELDTEXT are re-
sponsible for the entire alarm concept. Configuration is de-
scribed in the Interface Description Part 1, Signals.
MACHINE PARAMETER PROGRAMM.
Start-up/SIEMENS/PLC data
PLC/data
Name
. .
DEUTSCH
ENGLISCH
ESPANOL
FRANCAIS
ITALIANO
TEA2 12258
Start-up/SIEMENS/PLC data
PLC/data/DEUTSCH
Name
..
PCF1 18
LADER 0
PCF11 0
TUER1 0
SAVE EDIT LOAD
Create and edit a PCF file in the SERVICES area
Create and edit a PCF file in the PROGRAMMING area
Read in a file via V24 in the SERVICES area
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SERVICES DIAGNOSIS
Length Date
03–09–1993 15:46:08
Length Date
03–12–1993 11:14:00
03–12–1993 11:10:34
03–12–1993 11:02:14
03–12–1993 11:05:08
SINUMERIK 840C (IA)
09.95
11:33