Using This Manual; Conventions Used In This Manual - Eaton Power Xpert 9395 Installation And Operation Manual

Introduction
1.6

Using This Manual

This manual describes how to install and operate the 9395P-300 UPS. Read and understand the procedures
described in this manual to ensure trouble-free installation and operation. In particular, be thoroughly familiar
with the REPO procedure (see paragraph 7.4.2).
The information in this manual is divided into sections and chapters. The system, options, and accessories
being installed dictate which parts of this manual should be read. At a minimum, Chapters 1 through 4 and
Chapter 7 should be examined.
Read through each procedure before beginning the procedure. Perform only those procedures that apply to the
UPS system being installed or operated.
1.7

Conventions Used in This Manual

This manual uses these type conventions:
Bold type highlights important concepts in discussions, key terms in procedures, and menu options, or
l
represents a command or option that you type or enter at a prompt.
Italic type highlights notes and new terms where they are defined.
l
Screen type represents information that appears on the screen or LCD.
l
Icon
[Keys]
In this manual, the term UPS refers only to the UPS cabinet and its internal elements. The term UPS system
refers to the entire power protection system – the UPS cabinet, the battery system, and options or accessories
installed.
®
1-10 Eaton Power Xpert
Description
Information notes call attention to important features or instructions.
Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].
®
9395P-300 (300kVA, 300kW) UPS Installation and Operation Manual P-164000563—Rev 04 www.eaton.com/powerquality