UPS Operating Instructions
7.1.2
Circuit Breakers
Optional circuit breaker (CB1) is used to control the AC input to the UPS rectifier.
7.2
Color Touchscreen Control Panel
This section describes how the various screens are used to control and monitor UPS operation. Figure 7-1
shows the location of the color touchscreen control panel on the front door of the UPS. Descriptions of the
control panel functions follow. For a description of the UPS control panel functions, see paragraph 7.3.
7.3
Using the Color Touchscreen Control Panel
The following sections describe the UPS control panel and how to monitor and control UPS operation.
1
Figure 7-2. UPS Color Touchscreen Control Panel (Typical)
The color touchscreen control panel consists of:
A color liquid crystal touch screen display (1)
l
A horizontal row of LED indicators (2)
l
Before system power up, the panel displays a system status screen similar to the one shown in Figure 7-2.
®
7-2
Eaton
Power Xpert
(Symbols enlarged to show detail)
®
9395P-300 (300kVA, 300kW) UPS Installation and Operation Manual
2
P-164000563—Rev 04 www.eaton.com/powerquality