Figure 4-1. Removing The Isbm Section Left Side Shipping Bracket - Eaton Power Xpert 9395 Installation And Operation Manual

Insert the forklift or pallet jack forks from the right side of the pallet (facing the cabinet), between the
supports on the bottom of the pallet. If the sections must be moved using the cabinet front or rear fork lift
slots, see the caution statements at the beginning of this procedure.
2. Remove the three bolts securing the left side shipping bracket to the cabinet and three bolts securing the
bracket to the pallet (see Figure 4-1). Remove the left side shipping bracket.
Shipping Bracket
Bolts
Shipping Bracket
Bolts

Figure 4-1. Removing the ISBM Section Left Side Shipping Bracket

NOTE This figure depicts the Shipping Bracket on the 380V, 400V, 415V, and 480V Two
UPM configuration pallet. The 600V sections are oriented the same way and the
shipping brackets are removed the same way as this illustration.
® ®
Eaton Power Xpert 9395P-300 (300kVA, 300kW) UPS Installation and Operation Manual
Left Side Shipping
Bracket
P-164000563—Rev 04 www.eaton.com/powerquality
Installation
Pallet
Front Door
4-3