ABB ACH550-01 User Manual page 92

Clock set mode
The clock set mode is used for setting the time and date for the
internal clock of the ACH550. In order to use the timed functions
of the ACH550, the internal clock has to be set first. Date is used
to determine weekdays. It is shown in Fault logs.
To set the clock, follow these steps:
1 Press MENU to go to the
main menu.
2 Scroll to CLOCK SET with
the UP/DOWN keys and
press ENTER to go to the
Clock set mode.
3 Scroll to CLOCK
VISIBILITY with the UP/
DOWN keys and press SEL
to change the visibility of
the clock.
4 Scroll to SHOW CLOCK
with the UP/DOWN keys
and press SEL to make the
clock visible.
5 Scroll to TIME FORMAT
with the UP/DOWN keys
and press SEL.
6 The time formats are
displayed. Select a format
with the UP/DOWN keys
and press SEL to confirm
the selection.
80
ACH550 User's Manual
Start-up and control panel