ABB ACH550-01 User Manual page 185

ACH550 User's Manual
Code Description
0132 PID 1 DEVIATION
Difference between the PID1 controller
reference value and actual value
• Units and scale defined by PID parameters
0133 PID 2 DEVIATION
Difference between the PID2 controller reference value and actual
value
• Units and scale defined by PID parameters
0134 COMM RO WORD
Free data location that can be written from the serial link
• Used for relay output control
• See parameter 1401.
0135 COMM VALUE 1
Free data location that can be written from the serial link
0136 COMM VALUE 2
Free data location that can be written from the serial link
0137 PROCESS VAR 1
Process variable 1
• Defined by parameters in
0138 PROCESS VAR 2
Process variable 2
• Defined by parameters in
0139 PROCESS VAR 3
Process variable 3
• Defined by parameters in
0140 RUN TIME
Drive's accumulated running time in thousands of hours (kh).
• Cannot be reset.
0141 MWH COUNTER
Drive's accumulated power consumption in megawatt hours.
• Cannot be reset.
0142 REVOLUTION CNTR
Motor's accumulated revolutions in millions of revolutions.
• Can be reset by pressing the UP and DOWN keys simultaneously
when in parameter set mode.
0143 DRIVE ON TIME (HI)
Drive's accumulated power on-time in days.
• Cannot be reset.
Parameter listing and descriptions
Range
unit and scale defined
by par. 4006/4106 and
4007/4107
unit and scale defined
by par. 4206 and 4207
0...65535
-32768...+32767
-32768...+32767
-
Group 34: PANEL DISPLAY
-
Group 34: PANEL DISPLAY
-
Group 34: PANEL DISPLAY
0...499.99 kh
0...9999 MWh
0...9999
0...65535
173