ABB ACH550-01 User Manual page 183

ACH550 User's Manual
Code Description
0112 EXTERNAL REF 2
External reference,
0113 CTRL LOCATION
Active control location. Alternatives are:
0 =
HAND
1 = 1
EXT
2 = 2
EXT
0114 RUN TIME (R)
Drive's accumulated running time in hours (h)
• Can be reset by pressing the UP and DOWN keys simultaneously
when in parameter set mode.
0115 KWH COUNTER (R)
Drive's accumulated power consumption in kilowatt hours
• Can be reset by pressing the UP and DOWN keys simultaneously
when in parameter set mode.
0116 APPL BLK OUTPUT
Application block output signal. Value is from either:
• PFA control, if PFA Control is active, or
• parameter 0112
0118 DI1-3 STATUS
Status of the three digital inputs
• Status is displayed as a binary number.
• 1 indicates that the input is activated.
• 0 indicates that the input is deactivated.
0119 DI4-6 STATUS
Status of the three digital inputs
• See parameter 0118
0120 AI1
Relative value of analog input 1 in %
0121 AI2
Relative value of analog input 2 in %
Parameter listing and descriptions
2, in %
REF
2.
EXTERNAL REF
1
DI
1-3 .
DI STATUS
Range
0...100%
(0...600% for torque)
0=HAND, 1=EXT1,
2=EXT2
0...9999 h
0...9999 kWh
0...100%
(0...600% for torque)
000...111 (0...7 decimal)
2 3
DI DI
000...111 (0...7 decimal)
0...100%
0...100%
171