Wiring and EMC considerations
Determine electro-magnetic compliance (EMC) requirements
per local codes. In general:
•
Follow local codes for cable size.
•
Keep these three classes of wiring separated: input power
wiring, motor wiring and control/communications wiring.
•
Check the operational limits for the allowed maximum motor
cable length in section
•
If the installation must meet the European EMC Directive
requirements (see section
EN 61800-3 (2004)
for the allowed maximum motor cable length in section
connection
Note: Non-proper wiring is the source of the majority of EMC
problems. Please follow the instructions to avoid these
problems.
26
Motor connection
Compliance with the IEC/
on page 413), check also the EMC limits
on page 384.
ACH550 User's Manual
on page 384.
Preparing for installation
Motor