ABB ACH550-01 User Manual page 262

Code Description
3402 SIGNAL1 MIN
Defines the minimum expected value for the first display parameter.
• Use parameters 3402, 3403, 3406, and 3407, for example to convert
a group 01 parameter, such as 0102
conveyor driven by the motor (in ft/min). For such a conversion, the
source values in the figure are the min. and max. motor speed, and
the display values are the corresponding min. and max. conveyor
speed.
• Use parameter 3405 to select the proper units for the display.
Note: Selecting units does not convert values. Parameter is not
effective if parameter 3404
3403 SIGNAL1 MAX
Defines the maximum expected value for the first display parameter.
Note: Parameter is not effective if parameter 3404
9 ( ).
DIRECT
250
OUTPUT
Display
value
P 3407
P 3406
P3402
ACH550 User's Manual
Range
-
(in rpm) to the speed of a
SPEED
1 = 9 (
DSP FORM
P 3403
-
OUTPUT
Parameter listing and descriptions
).
DIRECT
Source
value
1
DSP FORM
=