ABB ACH550-01 User Manual page 81

ACH550 User's Manual
For detailed hardware description, see chapter
Note: The current parameter value appears below the
highlighted parameter.
Note: To replace the displayed value of a parameter with the
default value, press the UP/DOWN keys simultaneously.
Note: The most typical and necessary parameters to change are
the following parameter groups:
Group 10: START/STOP/DIR,
SELECT, Group 20:
22: ACCEL/DECEL,
30: FAULT FUNCTIONS.
Note: To restore the default factory settings, select the HVAC
default application macro.
Start-up and control panel
Group 99: START-UP
Group 11: REFERENCE
LIMITS, Group 21:
Group 26: MOTOR CONTROL
Technical data.
DATA,
START/STOP, Group
and Group
69