ABB ACH550-01 User Manual page 82

Start-up assistant mode
To start the Start-up assistant, follow these steps:
1 Press MENU to go to the
main menu.
2 Select ASSISTANTS with
the UP/DOWN keys and
press ENTER.
3 Scroll to Commission drive
with the UP/DOWN keys
and press SEL.
4 Change the values
suggested by the assistant
to your preferences and
then press SAVE after
every change.
5 After selecting the macro,
specify whether you want to
use the mechanical HAND-
OFF-AUTO switch.
6 After completing a task, the
Start-up assistant asks if
you want to continue with
the next one. Press OK
(when Continue is
highlighted) to continue
with the next task, select
Skip with the UP/DOWN
keys and press OK to move
to the next task without
doing this one or press
EXIT to stop the Start-up
assistant.
The Start-up assistant will guide you through the start-up.
70
ACH550 User's Manual
Start-up and control panel