ABB ACH550-01 User Manual page 229

ACH550 User's Manual
Code Description
2013 MIN TORQUE SEL
Defines control of the selection between two minimum torque limits
(2015
MIN TORQUE
0 =
MIN TORQUE
used.
1 = 1 – Defines digital input
DI
minimum limit used.
• Activating the digital input selects
• De-activating the digital input selects
2...6 = 2...
DI DI
selecting the minimum limit used.
• See 1 above.
DI
7 = – Defines bit 15 of Command Word 1 (parameter 0301) as the
COMM
control for selecting the minimum limit used.
• The Command Word is supplied through fieldbus communication.
-1 = 1( ) – Defines an inverted digital input
DI INV
selecting the minimum limit used.
• Activating the digital input selects
• De-activating the digital input selects
-2...-6 = 2(
DI INV
as the control for selecting the minimum limit used.
• See 1(
DI INV
2014 MAX TORQUE SEL
Defines control of the selection between two maximum torque limits
(2017
MAX TORQUE
0 =
MAX TORQUE
used.
1 = 1 – Defines digital input
DI
maximum limit used.
• Activating the digital input selects
• De-activating the digital input selects
2...6 = 2...
DI DI
selecting the maximum limit used.
• See 1 above.
DI
7 = – Defines bit 15 of Command Word 1 (parameter 0301) as the
COMM
control for selecting the maximum limit used.
• The Command Word is supplied through fieldbus communication.
-1 = 1( ) – Defines an inverted digital input di1 as the control for
DI INV
selecting the maximum limit used.
• Activating the digital input selects
• De-activating the digital input selects
-2...-6 = 2(
DI INV
as the control for selecting the maximum limit used.
• See 1(
DI INV
Parameter listing and descriptions
1 and 2016
MIN TORQUE
1 – Selects 2015
MIN TORQUE
1 as the control for selecting the
DI
6 – Defines digital input
)... 6( ) – Defines an inverted digital input
DI INV
) above.
1 and 2018
MAX TORQUE
1 – Selects 2017
MAX TORQUE
1 as the control for selecting the
DI
6 – Defines digital input
)... 6( ) – Defines an inverted digital input
DI INV
) above.
Range
-6...7
2).
1 as the minimum limit
2 value.
MIN TORQUE
1 value.
MIN TORQUE
2... 6 as the control for
DI DI
1 as the control for
DI
1 value.
MIN TORQUE
2 value.
MIN TORQUE
-6...7
2).
1 as the maximum limit
2 value.
MAX TORQUE
1 value.
MAX TORQUE
2... 6 as the control for
DI DI
1 value.
MAX TORQUE
2 value.
MAX TORQUE
2... 6
DI DI
2... 6
DI DI
217