ABB ACH550-01 User Manual page 179

ACH550 User's Manual
Group 99: START-UP DATA
This group defines special start-up data required to:
• set up the drive
• enter motor information.
Code Description
9901 LANGUAGE
Selects the display language.
0 =
ENGLISH
4 =
ESPAÑOL
8 =
DANSK
12 =
POLSKI
9902 APPLIC MACRO
Selects an application macro. Application macros automatically edit
parameters to configure the ACH550 for a particular application.
1 =
HVAC DEFAULT
5 =
FAN CONDENSER
8 =
INTERNAL TIMER
10 =
FLOATING POINT
WITH CONSTANT SPEEDS
-1 =
LOAD USER S
SET LOAD
With 1
USER S
parameter sets into the drive permanent memory for later use. Each set
contains parameter settings, including
the results of the motor identification run. With
2 the sets can be taken back in use.
S LOAD
The automatic saving and loading of the override parameter set is
defined by Group 17:
manually.
9904 MOTOR CTRL MODE
Selects the motor control mode.
1 = :
VECTOR SPEED
• Reference 1 is speed reference in rpm.
• Reference 2 is speed reference in % (100% is absolute maximum
speed, equal to the value of parameter 2002
2001
MINIMUM SPEED
greater than the maximum speed).
3 = :
SCALAR FREQ
• Reference 1 is frequency reference in Hz.
• Reference 2 is frequency reference in % (100% is absolute
maximum frequency, equal to the value of parameter 2008
FREQUENCY
minimum speed is greater than the maximum speed).
Parameter listing and descriptions
1 = ( ) 2 =
ENGLISH AM
5 =
PORTUGUES
9 =
SUOMI
13 =
TÜRKÇE
2 =
SUPPLY FAN
6 =
BOOSTER PUMP
9 =
INTERNAL TIMER WITH CONSTANT SPEEDS
11 =
DUAL SETPOINT PID
13 = -
E BYPASS
1 -2 =
SAVE USER S
and 2
SAVE USER S SAVE
OVERRIDE. With
– sensorless vector control mode
if the absolute value of the minimum speed is
– scalar control mode
, or 2007
MINIMUM FREQUENCY
Range
0...16
DEUTSCH
6 =
NEDERLANDS
10 =
SVENSKA
14 =
CZECH
1...14, 0...-4
3 = 4 =
RETURN FAN
7 =
PUMP ALTERNATION
12 =
DUAL SETPOINT PID
14 =
HAND CONTROL
2 -3 =
LOAD USER S
, it is possible to save two different
Group 99: START-UP
1
USER S
, it can be loaded
OR SET LOAD
1=SPEED,
3=SCALAR
MAXIMUM SPEED
if the absolute value of the
3 =
ITALIANO
7 =
FRANCAIS
11 =
RUSSKI
COOLING TOWER
0 = 1
USER S
2 -4 =
SAVE OR
DATA, and
and
LOAD USER
, or
MAXIMUM
167