The figure below shows changing the direction of motor rotation,
seen from the shaft end of the motor.
U1
Note: The direction of rotation can be changed from the drive,
but we recommend switching the motor cables to associate the
drive forward direction with the clockwise motor rotation.
Note: Now the drive is fully operational for manual operation. If
you wish to use I/O connections, refer to chapter
macros and
60
L1 L2
L3
V1
W1
W2
U2
V2
Motor terminal box
M
wiring.
ACH550 User's Manual
L1 L2
L3
U1
V1
W1
W2
U2
V2
M
Application
Installing the drive