Code Description
0144 DRIVE ON TIME (LO)
Drive's accumulated power on-time in 2 second ticks (30 ticks = 60
seconds).
• Cannot be reset.
0145 MOTOR TEMP
Motor temperature in degrees centigrade / PTC resistance in ohms.
• Applies only if motor temperature sensor is set up. See parameter
3501.
0150 CB TEMP
Temperature of the drive control board in degrees centigrade.
Note: Some drives have a control board (OMIO) that does not support
this feature. These drives always show the constant value of 25.0ºC.
174
ACH550 User's Manual
Range
0...43200
10...200ºC /
0...5000 ohm
-20.0...150.0ºC
Parameter listing and descriptions