ABB ACH550-01 User Manual page 84

Task name
Constant Speeds
PID control
Low Noise Set-up
Panel Display
Timed Functions
Outputs
72
• Prompts for the use of constant speeds
• Prompts for constant speed values
• Prompts for PID settings
• Prompts for the source of the process
reference
• Prompts for reference limits
• Prompts for the source, limits and units of the
process actual value
• Defines the use of Sleep function
• Prompts for the switching frequency
• Prompts for the definition of Flux optimization
• Prompts for the use of Critical speeds
• Prompts for display variable and unit settings
• Prompts for the use of Timed functions
• Prompts for the signals indicated through the
relay outputs
• Prompts for the signals indicated through the
analog outputs AO1 and AO2. Sets the
minimum, maximum, scaling and inversion
values.
ACH550 User's Manual
Description
Start-up and control panel