ABB ACH550-01 User Manual page 271

ACH550 User's Manual
A parameter can be connected to only one timer.
TIMER 1
3626 TIMER 1 SRC
TIMER 2
3627 TIMER 2 SRC
Code Description
3601 TIMERS ENABLE
Selects the source for the timer enable signal.
0 = – Timed functions are disabled.
NOT SEL
1 = 1 – Defines digital input
DI
• The digital input must be activated for timed functions enable.
2...6 = 2...
DI DI
enable signal.
7 = – Timed functions are enabled.
ACTIVE
-1 = 1( ) – Defines an inverted digital input
DI INV
enable signal.
• This digital input must be de-activated for timed function enable.
-2...-6 = 2(
DI INV
as the timed function enable signal.
Parameter listing and descriptions
1001 1
EXT
1002 2
EXT
1102 1/
EXT
1201
CONST SPEED SEL
1401
RELAY OUTPUT
1410
RELAY OUTPUT
4027 1
PID
8126
TIMED AUTOCHANGE
1 as the timed function enable signal.
DI
6 – Defines digital input
)... 6( ) – Defines an inverted digital input
DI INV
COMMANDS
COMMANDS
2
EXT SEL
1...1403
RELAY OUTPUT
4...1412
RELAY OUTPUT
PARAM SET
Range
-6...7
2... 6 as the timed function
DI DI
1 as the timed function
DI
3
6
2... 6
DI DI
259