Figure 3-29
Perform a User Two-Port Calibration
Refer to the section
Calibration" on page 3-19
calibration.
Connect the DUT
Equipment Setup for a Group Delay Measurement
View and Interpret the Group Delay
Measurement Results
1. To view the entire measurement trace on the display, press
Autoscale
.
2. To interpret the group delay measurement, refer to
"Example of a Phase-Derived Delay Measurement Display,"
analyzer's display if you are making this measurement on your
instrument.
a. The measurement trace depicts the amount of time it takes for
each frequency to travel through the DUT.
ES User's Guide
"Measuring S-Parameters using a Two-Port
for examples of how to perform a user two-port
Making Measurements
Measuring Group Delay
SCALE
Figure 3-30,
or your
3-71